Select appropriate dispensing mode, bottle or bucket fill, press button and fill.
To Prepare Use Solution: Add the product at 2 oz. of product per gallon of water (1:64).
For Use as a One-Step Cleaner/Disinfectant: Dilute at 2 oz. of product per gallon of water (1:64). Pre-clean visibly soiled surfaces. Apply Use Solution with a sponge, brush, cloth, mop, low pressure mechanical spray device, or coarse trigger sprayer to hard, non-porous surfaces. Spray 6 - 8 inches from surface, making sure to wet surfaces thoroughly. All surfaces must remain visibly wet for 10 minutes. Wipe surfaces or let air dry.
Floors: Sweep, dust mop or vacuum floors to remove loose dirt prior to cleaning. Use an auto-scrubber or swing machine with light cleaning (white or red) pads, machine brushes, or WAXIE Fast Glide Mopping System for daily floor cleaning. Apply solution to floor. Allow dwell time. Agitate and pick up soiled solution. It may be necessary depending on soil load to double scrub the surface. Rinse surface thoroughly after cleaning. Use unheated tap water.
NOTE: Rinsing is not necessary unless floors are to be coated with finish or restorer. When cleaning floors position “wet floor” signs around area to be cleaned. Floors will be slippery when wet or contaminated with foreign materials. Do not use on glassware, utensils, or dishes
*Turn off water supply after use and disconnect.